Skip to content Skip to sidebar Skip to footer

How to sheathe a house with a corrugated board

Corrugated board – inexpensive, aesthetic and environmentally friendly material, which was widespread when using objects such as: suburban houses, roofs, fences, fences, etc.D.

Let’s talk about how to learn how to sheathe a house with a corrugated board.

How to sheathe a house with a corrugated board

Basket of walls with corrugated board

If the sheathing is carried out in compliance with all the rules, then this will prevent negative influences on the wall of external factors. And the created air gap will provide ventilation and ventilation, preventing mold and condensate.

In addition, this layer will perform the function of sound and heat insulator. Due to this, the balcony or loggia, trimmed with corrugated board can become a warm and residential premises. One important point: the air gap is performed so that the air does not stagnate, but constantly circulates.

The lining of the house with profiled sheets can be performed in two ways:

Installation of sheets on an already finished wall.

Facing wall prefabricated elements.

Advantages of walls with corrugated board:

Reliable protection against noise;

Thermal insulation of the roof will be made at a high level;

Protection of walls from external negative factors;

The possibility of embodiment of creative ideas.

How to sheathe a house with a corrugated board

How to sheathe a house with a corrugated board

A metal frame made of fastening brackets with an increase is mounted on the wall.

The frame should be geometrically aligned correctly using levels and attached to the wall with dubili. The frame can also be made using wooden rails, however, the most preferred option is a metal frame. The walls are sheathed, placing sheets, as you can conveniently, you can vertically, you can horizontally.  You can even find design methods, diagonal orientation of profiled sheets.

It doesn’t matter which method you chose for the lining, the operational indicators do not change.

If necessary, then lay a layer of insulation, close it with a film from moisture. Fasten the insulation with plastered dubiles.

Sheets of corrugated board are attached to the prepared frame. To do this, use galvanized steel screws, which are equipped with moisture -proof gaskets.

The final stage is the installation of additional elements.

If the corrugated board needs to sheathe the rapidly vegetable insulated panel, then first of all you need to perform high -quality waterproofing of the foundation, using a roofing material laid in two layers:

The guide profile is fixed on the foundation using anchors.

Vertically to the profile attach racks equipped with a jumper on top, as a result we get the wall frame.

In the cells of the frame we put the plates of material for thermal insulation.

On the sides of the frame, we carry out the installation of the planks, and the sheets of corrugated board will be attached to them.

Fix the sheets in the same way as when lining the walls, using self -tapping screws with sealing gaskets.

The nuances on the sheathing of the house by the corrugated board:

How to sheathe a house with a corrugated board

Loosing the house with corrugated board, be sure to leave an air gap. Thus, you will significantly increase the duration of the construction service life.

Corrugated board – an economical option for making a hinged facade.

The assortment of profiled sheets is constantly updated.

The material is equipped with a modern polymer coating complete with corner elements, which allows you to give the facade of the house a unique style.

Thanks to lightweight, the installation of corrugated board can be carried out on vertical and horizontal lightweight structures.

Ease of installation makes it possible to independently perform the skin of the house.

© 365Сost, 2017-2024. All Rights Reserved.