Skip to content Skip to sidebar Skip to footer

Creating a door arch

Arched openings have been very popular for more than one year. The doorway in the form of an arch does not have any functionality and performs only a decorative function. For those who wish to quickly mount the arch, the construction store is ready to provide finished structures of various sizes. You can buy siding in Chelyabinsk at the above link.

But creating an arch with your own hands is much more economical and pleasant. The main design has three parts:

1. A frame consisting of three bars that are nailed to the walls and ceiling.

2. Two side walls made of wood steel (chipboard) with the created semicircle.

3. Organ strips that are attached to the end of the plates.

Before starting work, the doorways and the future arch are measured, its radius. It is better to measure the radius using a large circul, which is obtained when driving into the rail through two nails. One nail plays the role of the axis, and the second creates markings. The width of the chipboard sheet must correspond to the size of the doorway. It is laid on the floor and with the help of an impromptu compass created the desired semicircle. In order for the circle to be even, you need to determine the center of the sheet and set one nail on this point and scratch the line for another. To perform the same manipulation with the second sheet. Highlight the lines with a pencil. Using a hacksaw or electric lobe cut the arch. With the help of self -tapping screws, the arch is attached to the beam under the ceiling.

After fixing the workpieces along the entire length of the half -air, the organ strips are attached, the width of which is equal to the thickness of the sheets of chipboard and the width of the bars. Small cloves are used as fastening. Vertically, straight orlite stripes are attached to the side bars. After all the work is completed, the arch should acquire the type of a single whole.

© 365Сost, 2017-2024. All Rights Reserved.