To perform waterproofing work in construction, various waterproofing technologies are used, the use of which depends on various factors, each of them has its advantages and disadvantages. However, if universal material is required, then one of the best solutions will be a water -based bitumen polymer mastic. It can be used for waterproofing of foundations, basement and semi -basement, underground concrete elements, balconies, terraces, bathrooms, pools, artificial ponds, ceilings and walls, bathrooms and other rooms with increased humidity. In addition to concrete surfaces, it may be repaired by the melted roofs, both by sealing damage and by applying the coating as a whole to the entire surface of the roof.
Когда используется битумная мастика марок Эластопаз, Эластомикс и МастерФлекс, при соблюдении технологии, можно быть уверенным в том, что обработанные ими швы соединений бетонных элементов сооружений будут надолго защищены от протечек. This material does not require complex surface preparation, it is easily applied manually. To prepare the material, it is not required to heat it or use toxic solvents, which greatly simplifies work with it.
Elastopase is used mainly for sealing short and shallow seams, or elastics processed previously processed with liquid rubber, therefore it is applied using rollers, brush or airless spray, liquid rubber elastomix is used for seams of any geometry, with it you can fill deep cavities of various widths, so it can be filled with, so it It is applied using a spatula or scraper, for the effective use of the material, often applying one layer.
Elastopase is supplied in buckets of 18 kilograms, in the case when it is required to use the material not at a time it is well and stored in a closed bucket for a long time, to get a mastic of the consistency older, it is enough to add water to the bucket. Elastomix consists of two components of dense pastoral mass in a bucket and powder, after mixing their mastic, the mastic must be consumed in 1.5-2 hours.
Elastopase and elastomix are non -combustible substances, have excellent concrete agdomia (adhesion of surfaces of heterogeneous bodies), after solidification, the coating can constantly be in contact with water, have high elasticity and are environmentally clean, retain their properties in any climatic conditions, their processing increases anti -corrosion Concrete stability. The use of modern waterproofing polymeric materials will save a significant share of the costs of the content of buildings and structures, through the protection of structures from the destructive effects of water.