The use of thin -layer plaster is carried out along with the process of masonrying brick walls. At the same time, a thin grout is applied to the walls as the rows are laying. Thin -layer plaster can be used only if the panting work is carried out at a fairly high level. The thickness of the layer of the applied material is about 6 mm. The technology of thin -layer plastering has a large number of advantages in comparison with the usual way. In particular, this process is significantly simpler, characterized by high performance and saving time and material. Do not forget to visit the Dveri -lliance site and choose a new door there for your home.
Usually, when applying thin -layer plaster, the wall within one floor is divided into two or three tiers. As each new tier is laying, it is plastered. During the work, great attention should be paid to the evenness and verticality of the masonry. Thin -layer plaster is performed using a plastic solution. Moreover, it can be applied both manually and through the solution of. To flatter the solution, use a half terry. Their length is about 150 cm, the width is 10 cm. Surface grout is carried out by conventional graters. But they should be upholstered by felt or dense felt. As a result, the quality of surface processing is significantly increased.