It is not a secret to anyone that the ceilings in apartments and houses are far from even. The difference is from 8 to 10 cm. This can be fixed by plastering the surface of the ceiling, which is quite troublesome and takes a lot of time, and for money it is quite expensive. Often, after the end of the work, the plaster cracks, which leads to the loss of the desired species. Here, hanging ceilings from drywall come to our aid.
Sluttered ceilings made of drywall are one of the common types of ceilings. In rooms like a kitchen, a bathroom, bath ceilings made of drywall are not suitable due to humidity. In such cases, it is recommended to replace the usual drywall with moisture -resistant, which in its characteristics practically does not differ. The installation of such a ceiling is quite simple, which makes it possible to perform it on its own or low -skilled workers, thereby reducing its cost. By installing gypsum plasters, it gives a number of advantages: allows you to perform a flat surface with minimal costs, makes it possible to increase sound and thermal insulation, make lighting to the most exquisite taste, hide the electrical wiring and other communications, and it is environmentally friendly and fire safe and safe material.
GCL mount (gypsum-cartoon sheet) is carried out by means of a metal profile: guide 27×28 millimeters and a rack 60×27 mm., The profile has a standard length-3 meter. A frame is assembled from the profile, which is supported using straight suspensions. There are adjustable suspensions, but they are not so reliable. The choice of certain ones depends only on you. The main thing is that in the future the hanging ceilings from drywall do not give sagging and did not “walk”, which leads to the appearance of cracks.
We start installing the frame with marking using a hydraulicarian or laser level. We mark the line on the walls at the required distance from the ceiling along which we fasten the guide profile. Next, insert a rack profile into the guide after 40 or 60 centimeters. The rack profile should fall on the edges of the GCL. Next, sheets of drywall on screws are attached to the frame, the distance between self-tapping screws is 25-30 centimeters.
At the end of the installation, the ceilings made of drywall must be sparse, first gluing a sickle at the seams. The surface of such a ceiling is well suited for almost any material for further finishing, which makes it possible to show a fantasy to create the desired comfort and comfort.
On conscience, mounted suspended gypsum plasterboard ceilings will last you for a long time, adding comfort and comfort to your life.