Skip to content Skip to sidebar Skip to footer

Installation of multi -level ceilings made of drywall

Nowadays, the market of finishing and building materials offers a very large assortment of various goods. Gypsum cardboard, thanks to its qualities and properties, occupies one of the leading places among them. Currently, drywall is used as a finishing material when installing wall panels, as well as performing the installation of multi -level ceilings from drywall of various design – stretch, suspended single -level ceilings. With the help of drywall, you can make a multi -level ceiling, it is not very difficult and inexpensive.

Despite the apparent complexity of the design, the manufacture and installation of multi -level ceilings from drywall does not cause special difficulties among specialists. The most important thing in this design is to correctly assemble the frame of the required configuration. The installation of multi-level ceilings made of drywall from the upper level begins, which is defended from the load-bearing floor panels of 10-15 cm, then the lower level is mounted. The starting profile is mounted on the walls using dowels, it is located around the perimeter, then a transverse CD profile is inserted into it so that they make a grid, while the distance between these profiles should not be more than 60 cm.

After reliable consolidation of the first level, they move to the second. The frame is made of standard profiles produced by Knauf. To strengthen the stiffness, you need to enhance the frame with membranes.

If figures of a complex shape are placed in the room on a multi -level ceiling, then they, as a rule, are collected on the floor, then attaching the entire structure to the ceiling.

The gypsum plasters are attached to the ceilings of a complex configuration in the same way as on the usual flat ceiling. First, flat parts from a sheet of drywall are cut out, then the side is mounted. In order for the long strips of drywall to take a rounded shape, a special needle roller must be rolled on its surface, or, having moistened with a drywall sheet and giving it the desired shape, dry. In order to calculate the fasteners of a multi -level suspended drywall ceiling, the number of screws should be taken about three times more than screws for the installation of a single -level ceiling. Immediately after installation, they start painting the ceiling in the desired color or by pasting it with special wallpaper. I hope that the installation of multi -level ceilings from drywall will be easier for you after reading this article.

© 365Сost, 2017-2024. All Rights Reserved.