Skip to content Skip to sidebar Skip to footer

DIY polycarbonate gazebo

You can decorate your country area with a polycarbonate gazebo. It is rapidly constructed, little costly and does not require the application of special efforts to build it. Polycarbonate is a new solution in construction, because it has a lot of positive aspects. This is a fairly shock -resistant material, quite light, respectively, does not require the construction of supporting structures, and also withstands temperature differences and wind and snow loads. It is an ideal solution for light transmitting greenhouses, arbors, because it can be easily bend, cut and drill.

Consider step -by -step instructions for building a gazebo with your own hands:

First of all, you need to start choosing a place for the gazebo, it is advisable to choose a place without drafts, in order to avoid any inconvenience. The gazebo is installed both on the ground and on the platform.

If you decide to use the platform, then in this case prepare a screw foundation. Make markings for future columns and install them in pits, fixing with bricks and leaving 15 cm for solution.

We collect a frame that can be made from wood, profile or metal. It is best to choose metal, although the tree will cost you cheaper, but over time it will rotate. Elements are fastened with self -tapping screws.

Glazing the structure with polycarbonate. Since the material is easily drilled, after selecting the necessary sheets, safely fix them with screws with a silicone sealant.

© 365Сost, 2017-2024. All Rights Reserved.