After cutting and marking sheets, you need to do neat edges on the edges (joints of sheets), this can be done with a knife, but it is better to use a special rubbish designed for drywall. Here is the process with the preparation of drywall sheets, mounting a gypsum plasterboard ceiling with your own hands can be considered approaching the end.
Next, you need to deal with a metalloprofille, on which the ceilings of drywall are held, and which give them a variety of forms. The suspensions or screws are attached to the supporting structure (overlap) with the help of arcer or screws, to which the ceiling profile will then be attached. The option of assembling the ceiling frame from the metallophyle directly depends on the adopted architectural decisions that must be taken into account by installing the ceiling from drywall on its own. And the distance between suspensions, main, main, longitudinal and transverse profiles directly depends on the size of the room, and, therefore, the load that the frame should withstand:
But the process of attaching profiles, as in other things, the process of creating ceilings from drywall with your own hands should be carried out in some sequence:
1.Prepare the surface – to leave and scrap everything that does not firmly hold on (old plaster, etc. D.), in addition, it is worth treating the surface with antifungal agents, if there are fears of such an unpleasant surprise in the future.
2. Calculate how to install ventilation, electrical wiring, places of future lamps and other things, so that then when the ceiling from drywall will not be ready to do excessive work, or not create the conditions under which these manipulations will be difficult to produce.
3. Suspension fastening, then fixing the main profiles on them and their alignment on one plane.
4. Fastening to the profiles of supporting profiles.
But it is worth clearly understanding that the ceilings are made of drywall is the only thing that should be kept by the metallokas (wiring and lamps up to three kilograms can not be taken into account). Everything else (for example, air conditioning and so on) should have their own fasteners.