Skip to content Skip to sidebar Skip to footer

Ceiling insulation in a private house

For all people, his house is considered a fortress, since only in it, being in comfort and warmth, he feels completely protected. But, gently insulating the windows and walls, it is sometimes cold enough in the house, and then additional heating structures are used.

But in reality, the air, warming up, rises upstairs and through the ceiling, which is not so scurrious to the insulation, goes into the unknown. In a particular way, part of the heat generated by the used heaters disappears in this way. It turns out that along with the warmth, money is getting out of the house. And therefore, without slowing down, you should start warming the ceiling. As a ceiling material for insulation is very often used:

Mineral -based cotton wool;

foam;

Because these materials are considered especially affordable and are not highlighted by a high price. It is also worth saying that with their help you can make the necessary work on their own. To start insulation of the ceiling, the material itself will require the insulation, and for the waterproofing mother “Pergamin. For the structure of the frame, you need a smallboard, and also other elements required for fasteners, both the frame and material for insulation, in other words, nails, glue and foam for installation work. You should again prepare the tools necessary for the installation of the material for insulation, which include:

hacksaw;

electrician;

knife;

hammer;

Scurgery.

Excellent note about how to perform ventilation in a private house.

Ceiling warming with outside

To insulate the ceiling from the outside, an attitude will be an excellent option, which must be cleaned in advance from garbage. Further, based on the measurements, a strong foam is bought with a thickness of at least 0.5 cm. The floor of the attic is laid by this material, and all the joints are glued with foam for installation. In order to avoid damage to foam, in the option of using the attic in the form of a warehouse of extra objects, you need to worry that it is a polity of a concrete -based polity on top of it, at least 50 mm thick. If, for example, as a warming material, a wool on a mineral basis is used, then a frame will be needed, in which parchine sheets are laid, and on top of it – material for insulation. It should be borne in mind that min. Vatu cannot be compressed or squeezed strongly, because it must contain air gaps that perform the roles of heat guardians. It is also worth saying that it will be better to cover the floor with 2 layers of material for insulation. On top of the material for insulation falls a flooring.

Ceiling insulation in the middle of the room

If the system of the house does not provide the presence of the attic, then it is unlikely that. Here will have to carry out all the insulation work in the middle of the room, and this leads to some awkwards. To arrange ceiling insulation inside, you need to assemble a frame of wood, which leads to a reduction in the height of the room. It is also worth saying that, after all the work performed, the room will need to carry out repair work. But, when compared with the heat received after such actions, all these problems will simply be miserable. The entire warming process of the ceiling is that the space between the frame is glued, primarily with pergamine, and then with a heater, in this case, a mineral -based cotton wool. In the form of a fixer, glue for tiles can be used, because it will instantly glue any materials to the ceiling. Then the ceiling must be sheathed with plasterboard sheets, which will become an insurmountable barrier to heat leakage from the house. If the ceilings in the house are low enough and there is no opportunity to use a wooden frame, use aerated concrete panels, which, except for low thermal conductivity, are also considered quite easy. But, before gluing them, the ceiling and panels, from the adjoining side to the ceiling, you need to primer. As soon as one row of panels is glued, then they should be fixed as in chess. Then a primer layer is again applied to the ceiling. Then we proceed to the final cladding of the room. Ceiling insulation using these options can help save heat, save electricity and perform the home atmosphere more comfortable and comfortable.

Video: how to warm the ceiling in a private house correctly

© 365Сost, 2017-2024. All Rights Reserved.