Stucco molding and other decorative gypsum elements are popular and are used for interior decor for a long time.
Despite the fact that there are a lot of decor technologies, the demand for gypsum stucco molding is still very high. It is very important that the installation of stucco molding from gypsum is carried out with strict observance of all rules.
The fact is that even small gypsum elements weigh decently. Turning off from a great height, at best, they will damage furniture or appliances, and at worst, they can cause serious harm to human health, and even kill him. This should not be allowed in any case. That is why this task is better to entrust professionals guaranteeing the high quality of their services.
If there is no way to contact them, you can purchase everything yourself and the installation can also be carried out on your own. Affordable stucco molding from gypsum at low prices for . It is not necessary that the company be in the same region as the customer, because there is delivery.
Installation of light gypsum stucco molding
It is necessary to get the reverse surface of such products perfectly. This can be done using sandpaper. On the back of the gypsum stucco molding of lightweight, you need to apply high -quality PVA glue in one or two layers, and attach to the wall or ceiling where it was planned to glue it. It is necessary in this position, pressing to hold stucco for 4-5 minutes, until PVA glue becomes thick and hardens.
Installation of heavy gypsum stucco molding
Their installation is complex, requires responsibility, attentiveness. For example, it can be cornices or sockets. It is necessary to strictly observe the technology if you set them yourself, because the safety of people, the safety and integrity of property depends on it. They are glued to the dowel – nails and a special fixing mixture. First you need to make a notch on the wall to improve gluing.
To prepare the mixture, you need to mix water, gypsum brand G-10 or G-7 and again PVA glue. The mixture should turn out like a thick sour cream. The back of the product before installation must be wet. Before installing the wall or ceiling where the product will be glued, it is necessary to primed with a mixture of water and PVA glue. The mixture is applied to the back and applied to the surface. If the product is very heavy, you need to use galvanized or announced dowel-gvo-gvo to fix for fixation so that they do not rust later. The caps can then be hidden with putty or gypsum.