Often the walls in apartments need additional insulation. To achieve good results for thermal insulation, you need to use special materials of high quality. One of the options for insulation of brick walls. If you plan to carry out high -quality repairs in your apartment, then competent preparation of walls plays a far from the last role in this case. Today we will talk about how to warm the wall in the apartment from the inside, what materials are needed for this. And also consider one of the effective options for thermal insulation of the brick wall in the “corner” apartment or private house.
The main criteria for choosing material
So, in order for the insulation of the wall in the apartment from the inside to be durable and high -quality, then the materials for this event must be selected very carefully. The main indicators of competent choice are the abilities of the material-assembly:
· Non -combustibility, a high level of resistance to the influence of high temperature;
Low heat conductivity. In other words, the selected material should not let the heat out. The smaller the thermal conductivity per square, the more thin a sheet of insulation will be. And this gives an excellent opportunity to maintain more the free area of the room;
· At the time of use, materials should not distinguish any harmful substances that adversely affect the health of people and animals;
· Long -term operation and maximum resistance to deformations, damage to various kinds;
· Moisture resistance.
All of the above qualities are inherent in many heaters, but the most popular of them are polystyrene, mineral wool and polyurethane foam. Experts strongly advise to opt for these materials.
Option of brick wall insulation
Insulation of the brick wall from the inside is carried out in several ways. In continuation of our review, we will consider one of the most effective thermal insulation methods. In this case, stoves from foam or mineral wool can be used as insulation.
1. Using a special solution of glue+plaster on the wall, a layer of mineral wool or polystyrene foam is mounted on the wall.
2. Another layer of the same solution for additional isolation is applied from above. It is reinforced with a fiberglass.
3. The grid is treated with a primer, and then decorative materials.
4. If you want to save, then it is not necessary to use a layer of “decor”. An alternative to him can be a putty of white cement and painting the wall in the desired color.