The current requests for repair and construction requires all the best and better quality from the contractor. Customers want to get as many diverse innovations, grace and style as possible.
To achieve the desired result, builders use only new finishes, since using the old methods of finishing the necessary result do not get. For example, leaving the walls with plaster will not work as good as it can be done using drywall.
With the help of drywall, you can even aligned the walls and this method is modern in the construction world. Also, using this building material, you can create a variety of decorative surfaces.
The advantages of drywall include the absence of acidity, toxic substances, absorption of moisture, and so on. Some types of this material are moisture resistant and fireproof, and have less weight and plasticity. Drywall allows you to align the walls much faster than using plaster or putty.
Also, drywall is used to align the walls in old houses where plastering is ineffective and takes a lot of time. After decoration of the walls of drywall, they become perfectly even and smooth, which allows you to stick wallpaper on the wall, paint or use other ways of decorating the room.
Drywall sheets are of different types: moisture -resistant (GKLV), standard (GKL) and fire -resistant (GCLO). Also, there are ways of facing: frameless and frame. Drywall cannot be used if pressure is on the wall, because the repair will be difficult enough. By the way, dynamic pressure is much worse than static. Do not forget to make hatches to communications that are installed quite easily.
Before starting to align the walls, you need to choose the installation method: installation on the frame or cladding. Facing is carried out using special gypsum glue. But this method is used only for those walls on which there are no crumbling, excess moisture, freezing and condensate.
Before starting work, it is necessary to cut to a certain length, having previously provided all the gaps (from the ceiling to the sheet and from the floor to the sheet). This is done for drying glue and ventilation. But do not forget to carry out hidden wiring before gluing drywall.
For gluing drywall sheets to the wall, it is necessary to apply glue on the back of them and attach to the wall. Then, tap with a rubber hammer, connect the sheets together and set them in level.
Although this method is simple, the builders prefer installation on a pre -mounted frame from a metal profile or wooden beam.