Ceramic tiles are the most optimal kitchen decoration option. Since it is easily washed, hygienic, as well as durable. We are popularly accepted on the floor with linoleum, and facing tiles are used only for wall decoration. Now many people make gender heated, so they choose such a motherial. If you decide to stop your attention on facing tiles, then we will give you some tips.
How to choose and buy building materials?
Basically, the kitchen floor is most susceptible to all sorts of loads. They go along it more often, especially in places such as, near the refrigerator, gas stove or near the sink. By the way, you have to wash it more often. In such cases, facing ceramic tiles for the floor is needed, to choose with good chemical and mechanical characteristics.
Mechanical characteristics include hardness and resistance to the bend of ceramic tiles. In Megoposkals, the resistance of the bends is measured. In our domestic tiles, the strength of the bend should be at least twenty -seven Megoposkal. And the firmness for the tiles of domestic production should correspond to no less than the fifth grade.
For cladding kitchen walls, you can use ceramic tiles with low strength, because the walls, in principle, are not subjected to mechanical loads. Much attention should be paid to how the tiles to chemical loads. After all, in reality, the material in the kitchen is subjected to all kinds of chemical exposure and destructive acids. High chemical exposure is exerted by detergents and food products. Tiles need to be chosen with high thermal resistance and alkalid resistance.
Glazer of tiles should withstand about one hundred thirty degrees Celsius. According to the European standard, the alkaline resistance must comply with the class not lower than in. The resistance of the material determines the European standard, and it should be no less than the second class. The resistance of ceramics of all kinds of chemistry is also not a little important factor, it should also be no less in class. In the saproting documents of building material, you can see the above compliance. But it happens, so the characteristics are applied to the wrong side of the material.
When buying material, take a closer look so that there are no cracks or chips. The top of the tile should be perfectly even. It’s easy to check it, you just need to attach two tiles with the front side to each other, the cracks should be absent. You always need to buy this building material by about 15% more than the area that needs cladding. Private board of ads in Kyiv