Installation of drywall is conditionally divided into several directions:
Installation of walls and partitions made of drywall
Archers made of drywall
Slopes made of drywall
Facing (sheathing) of the walls of drywall (with the possibility of thermal insulation and sound insulation)
Drywall ceilings (with the possibility of thermal insulation and sound insulation)
Each of these areas plays an important role in the implementation of the “black decoration” in repair or construction. Read more about each type, where and when it is applied.
Installation of walls and partitions made of drywall
The construction of walls and partitions from drywall is very practical, less costly compared to construction from another material, mobile (easy to carry out dismantling and redevelopment). A very popular type of partitions in office premises, houses, apartments, cottages. Temporary costs are much lower (simply put, quickly and with a minimum amount of construction garbage). When installing walls, drywall partitions, there is an additional possibility of soundproofing and thermal insulation by laying the corresponding material into an empty space between the profiles and sheets of drywall.
Archers made of drywall.
Drywall, with the ability to work with it, seriously facilitates the manufacture of arched openings of any complexity, and accordingly their cost is much lower. The finished arch can be suitable for use for many types of finishing material (paint, wallpaper, etc.).
Slopes made of drywall
Despite the complexity and relatively greater cost of work when installing a slope of drywall in comparison, for example with plastic, the demand for this type of work has not lost its popularity. We offer the manufacture of slopes of any kind – door, window, passing, etc., any complexity for the corresponding ratio of price and quality. Hypsum plasterboard door slopes on the time spent on their device are located between slopes from plaster and PVC (the latter have the smallest time interval for manufacturing)
Hypsum plasterboard walls
If the deviations (uneven) of the walls are too large from the required value (t. e. more than 10cm.) and (or) the use of plastering work is more costly, resort to the help of drywalls, for the “suturing” of the walls. It is also necessary to use if necessary insulation or sound insulation of the room inside. On walls with mounted drywall can be linated with ceramic tiles, putty with wallpaper for painting or pasting, lay a cork coating and much more.
Plasterboard ceilings
Когда необходимо выровнять потолок или смонтировать многоуровневый потолок применяют гипсокартон, как один из самых популярных и дешевых материалов для этих целей. On such ceilings, you can easily realize even the most refined and specific lighting. Lights (lamps) of lighting simply crash into the ceilings, and the entire cable wiring is hidden under drywall, if necessary, it can be easily converted or replaced (agree when the cable is mounted in the stroobe and hubby, its replacement is not so simple). When installing ceilings from drywall, the total height of the room decreases. On the one hand, if the ceilings are high (3m. and more), and they must be lowered below, this is good. On the other hand, if the ceilings are low, and irregularities no more than 10cm., It is better to use the services of the ceiling plaster, in order to minimize the height in the room.
The laying of drywall on the ceilings is used and when it is necessary to insulate it or soundproof. Then the insulation (sound insulator) is laid in the free space between the profiles and drywall. Mounted ceilings are always spit (docking seams between the sheets are sealed with a specially designed mixture.