The racks for the bar appeared in our kitchens quite recently and have already gained great fame. Now they are accessible to everyone who suits the taste of even a very demanding customer. Manufacturers recommend us variations of very different materials-from wood to bar racks made of non-natural stone, and furniture designers make racks for a bar of very different shapes suitable for all permissible styles-from constant classics to the image of high-tech. They perfectly fit into the general apartment design and perfectly fill the interior of the kitchen, are considered its obligatory component, practical and convenient to use.
The bar counter has a huge number of varieties of execution and will look great both in a large and in a completely small kitchen. In front of the owners, a large kitchen kitchens are revealed many location options, but it will look spectacular and best in the very center, in a small room, it is most correct to make a corner or layering rack. Nevertheless, regardless of the design and room of the apartment, before installing racks for the bar, you always need to draw a sketch of the kitchen, recreating it with taking into account all the details and performing a specific scope
The most basic requirement that is imposed on the bar at the time of the creation of the drawing – it should not block the passage into the living room and interfere with the movement of loved ones
Options for bar stroke systems for the kitchen
Disadvantages and superiority
Of course, the bar for the bar has a lot of advantages
It is suitable for quick food, and therefore it will be ideal for families, which are chasing time, in specifics in the morning meal.
Replaces the table and will look great on small kitchens, significantly saving their space.
In apartments and large houses in the form of a design component, it is an excellent assistant in the issue of kitchen zoning.
A good approach to creating a bar design for a bar creates an atmosphere of ease and lightness in the kitchen area.
A huge price range makes it possible to establish a lean option even to families with a small budget.
Small systems have one characteristic ability – they make the impression of an enlarged space of the room.
The excellent height of the rack for the bar makes it possible to make it easier to cook food on it, because you do not need to bend at all with the whole body above the countertop, loading the spine and lower back.
If your kitchen has an option that has the opportunity to make up, then this kind of stand is made incredibly practical component in the design, and also acquires an additional convenient value, because it makes it possible to save the executiveness in the room as much as possible. Когда появляется потребность, мы приобретаем настоящий стол для принятия еды или поверхность для работы для домохозяйки, а когда потребность в ней исчезает, то можно ее просто сложить.
Only one minus of the rack for the bar is that it is inappropriate for minimal children – it is inconvenient for them to sit on such large chairs. But in this embodiment there is an ordinary solution – to order a two -level system, which children are capable of. Again, as an option, in the kitchen area you can place a small table, for which only the minimum members of the family will sit
Thanks to the development of new materials made using high technologies and technologies, collecting a rack for the bar with your own hands, at home now does not personify the work at all. Furniture made by the owner’s skillful hands is an object of pride in front of countless guests. The most basic is to know important points of work and clearly follow the instructions
Important stages for creating a rack for the bar with your own hands
Set the necessary type of system
The type of system is reduced at the time of modeling the creation and the drawing room. In order to be convinced that the selected version of the rack for the bar will stay in the right section of the room, without interfering with the movement of the family participants, to respond to all your needs and fulfill the roles imposed on it, the most beautiful thing is to make the kitchen layout in a specialized computer program. This will make it possible for you to better imagine the future design and make suitable corrections even in the planning step, not allowing you to make a mistake during construction work
Suitable for the bar for the bar is installed taking into account the size of the kitchen, the design of its furniture. This is a L-shaped model, or a two-level system, a folding or hinged version (in this version, the countertop is hung to the ceiling and, using a specialized mechanism, is lowered at the right moment), but a rather popular option is from a holistic block
Calculation of materials
Having formed with the model, draw a drawing of the future design and calculate the consumption of the material that will be required. The traditional height will be 1.1 meters, and the length will depend on your desires
For the manufacture of the traditional option, you will need to purchase bars of wood 0.5x1m, trim planes 0.25x1m, fiberboard leaves, plywood, nails, screws, wood varnish, stain
Installation
From the beam, the frame of the future rack for the bar is cut, the details of which are fastened with nails, while working, apply bars close to each other, make sure that the connections are perfect, without creases. As soon as the bars are firmly fastened, they are placed on the planks (guides) of the same length. The installation is performed strictly vertically, the system must be perfect. The frame is ready
Now, using dowels, the frame is fixed to the floor, and with the help of specialized fasteners – to the wall surface. Plywood sheets are attached to the base of the frame (it will be the lower shelf), and to the top of the frame on the screws, we plant a thoroughly trimmed sheet of fiberboard, which serves as a layer from the bottom of the countertop. We put two rectangular plywood sheets on partitions between the compartments in the middle of the structure. Then another 1 sheet of fiberboard is laid on the countertop with the upper layer and sheathe the entire system on the sides of the plywood sheets
We built a rack for the bar with our own hands, the matter was left for a small. We close the places of joints and corners with decorative skirting boards, cover the entire stain stain. Now you can start the decor. To do this, use all your imagination – glass or surface with the property of the mirror of the countertop, coating the walls with a beautiful painting, or an extraordinary palette of colors, maybe you want to sheathe it with wood panels or cover the most impossible flowers with a matte film, and maybe you are enough will just cover it with several varnish layers. You need to focus on your own taste and tastes
We have collected a beautiful and inexpensive bar for a bar, which is entirely ready for work
Permissible system variations
According to the rule we described, you can personally collect any type of system with your own hands with your own hands. Here are a couple of options for its placement and manufacturing within the room
The traditional system is used as an independent object, due to the fact that its height is 110cm, it is perfectly replenished with chairs for the bar on large legs.
The multifunctional option is a bar for a bar, which will be combined with a table for lunch, its height changes in agreement with the tastes of the owners, but will not be more than 90 cm.
A great option for a small room if you use a window sill under a bar for a bar. In this version, the bar for the bar is folding and can at any comfortable moment be laid out and installed on specialized hidden legs.
Two -level system, the upper level of which is considered the most persistent bar, and the bottom is the kitchen table. This option is perfect in the option when the bar for the bar put the walls between the kitchen and the living room.
Option for large kitchens – a bar for a bar in the very center of the room. It will look most advantageous if it is made with a holistic block with the whole kitchen. This is one of the very comfortable variations, because with similar placement it will be possible to approach the rack from any side. The height of such a rack for a bar is 120cm, the width is up to 80cm, but the length will already depend on the desires of the size of the kitchen itself, it is considered excellent length from 50cm per person.
As soon as you collected a bar for a bar with your own hands, you can try to guarantee not only the necessary lighting, so that it is halogen practical system, but also a fashionable object of design, appropriate for today’s needs. One of the best lighting options is the use of lamp racks. For this small size, the beam, in which lamps will be installed, fix it straight above the counter. If the option of creating lighting with your own hands does not suit you, you can try to guarantee it using ordinary lamps on long legs, hanging them to the ceiling above the counter
Materials that are very often used for the production of bar
Designers of the design use very, very different materials, to implement their creative concept. Within the borders of the production of one rack for the bar, several very different materials can be applied, which will look perfect together and make up for each other
Now, in the form of the most popular raw materials, a real or non -natural stone, materials with imitation of real marble, iron, glass, gipper, and wood are used for the manufacture of bar. Ready -made racks for the bar have a different texture – from varnish covering or the result of the “metallic” to the use of unprocessed real material